Ip Netstream Export V9-Template Refresh-Rate Time - HP MSR1003-8S Command Reference Manual

For a NetStream server to use correct version 9 templates, configure the refresh frequency or refresh
interval for version 9 templates. If both settings are configured, templates are sent when either of the
conditions is met.
To configure the refresh interval for version 9 templates, use the ip netstream export v9-template
refresh-rate time command.
Examples
# Configure the device to send version 9 templates to NetStream servers every 100 packets.
<Sysname> system-view
[Sysname] ip netstream export v9-template refresh-rate packet 100
Related commands

ip netstream export v9-template refresh-rate time

ip netstream export v9-template refresh-rate time
Use ip netstream export v9-template refresh-rate time to configure the refresh interval for version 9
templates.
Use undo ip netstream export version to restore the default.
Syntax
ip netstream export v9-template refresh-rate time minutes
undo ip netstream export v9-template refresh-rate time
Default
Version 9 templates are sent every 30 minutes.
Views
System view
Predefined user roles
network-admin
Parameters
minutes: Specifies the refresh interval in the range of 1 to 3600 minutes.
Usage guidelines
A NetStream server uses version 9 templates to parse the data from the NetStream device, but the server
does not permanently save version 9 templates.
For a NetStream server to use correct version 9 templates, configure the refresh frequency or refresh
interval for version 9 templates. If both settings are configured, templates are sent when either of the
conditions is met.
To configure the refresh frequency for version 9 templates, use the ip netstream export v9-template
refresh-rate packet command.
Examples
# Configure the device to send version 9 templates every 60 minutes.
<Sysname> system-view
[Sysname] ip netstream export v9-template refresh-rate time 60
380