Directed Call Pick-Up - Polycom Version 1.4.x 17 Administrator's Manual

Administrator Guide - SoundPoint
incoming call treatment feature. The user's ability to originate calls is unaffected by
all call diversion options. Each registration (line) has its own diversion properties.
Central
(boot
server)
Local

3.2.6 Directed Call Pick-up

Calls to another phone can be picked up by dialing the extension of the other phone.
This feature depends on support from a SIP server.
Central
(boot
server)
Local
® ®
IP / SoundStation IP
Configuration file: Set all call diversion settings including a global forward-to
phone1.cfg contact and individual settings for call forward all, call for-
ward busy, call forward no-answer, and call forward do-not-
disturb.
•
Web Server Set all call diversion settings.
(if enabled)
Navigate to: http://<phoneIPAddress>/reg.htm
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. They will perma-
nently override global settings unless deleted via the Reset
User Settings menu selection.
Local Phone User The user can set the call-forward-all setting from the idle
Interface display (enable/disable and specify the forward-to contact)
as well as divert callers while the call is alerting.
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. They will perma-
nently override global settings unless deleted via the Reset
User Settings menu selection.
Configuration file: Turn this feature on or off.
ipmid.cfg
•
Web Server None.
(if enabled)
Local Phone User None.
Interface
Copyright © 2004 Polycom, Inc.
For more information, see 4.6.3.3 Diversion <divert/>
on page 124.
For more information, see 4.6.1.21 Feature <feature/>
on page 109.
Features
39