Table of Contents
Advertisement
Administrator Guide - SoundPoint
3.1.17 Local Digit Map
The phone has a local digit map feature to automate the setup phase of number-only
calls. When properly configured, this feature eliminates the need for using the
soft key when making outgoing calls. Instead, as soon as a digit pattern matching the
digit map is found, the call setup process will complete automatically. This feature is
similar to the digit map feature of the Media Gateway Control Protocol (MGCP) and
the configuration syntax is the same as that specified in 2.1.5 of RFC 3435. The phone
behavior when the user dials digits that do not match the digit map is configurable. It
is also possible to strip a trailing # from the digits sent.
Central
(boot
server)
Local
3.1.18 Microphone Mute
A microphone mute feature is provided. When activated, visual feedback is provided.
This is a local function and cannot be overridden by the network.
3.1.19 Multiple Call Appearances
The phone supports multiple concurrent calls. The hold feature can be used to pause
activity on one call and switch to another call. When active on one call, an additional
incoming call is presented using the familiar "call waiting" style. Soft keys with call
disposition options are presented to the user. The current user interface is limited to
30
®
®
IP / SoundStation
IP
Configuration file:
sip.cfg
Configuration file:
phone1.cfg
Web Server
(if enabled)
Local Phone User
Interface
Copyright © 2004 Polycom, Inc.
Specify impossible match behavior, trailing # behavior,
digit map matching strings, and time out value.
•
For more information, see 4.6.2.1.3.5 Conference
Setup <conference/> on page 118.
Specify per-registration impossible match behavior, trail-
ing # behavior, digit map matching strings, and time out
values that override those in sip.cfg.
•
For more information, see 4.6.3.4 Dial Plan <dial-
plan/> on page 126.
Specify digit map matching strings and time out value.
Navigate to: http://<phoneIPAddress>/appConf.htm#ls
Changes are saved to local flash and backed up to
<Ethernet address>-phone.cfg on the boot server.
Changes will permanently override global settings unless
deleted via the Reset User Settings menu selection.
None.
Features
Send
Advertisement
Table of Contents
