Cisco 500 Series Administration Manual page 185

10
STEP 3
STEP 1
STEP 2
STEP 3
183
• Automatic Recovery Interval—Specify the time delay for automatic error
recovery, if enabled, after a port is shutdown
Automatic ErrDisable Recovery
• Port Security—Select to enable automatic error recovery when the port
has been shut down for port security violations
• 802.1x Single Host Violation—Select to enable automatic error recovery
when the port has been shut down by 802.1x.
• ACL Deny—Select to enable automatic error recovery mechanism by an
ACL action.
• STP BPDU Guard—Select to enable automatic error recovery mechanism
when the port has been shut down by STP BPDU guard.
• STP Loopback Guard— Enable automatic recovery when the port has been
shut down by STP Loopback Guard.
• UDLD—Select to enable automatic error recovery mechanism for the UDLD
shutdown state.
• Loopback Detection—Select to enable error recovery mechanism for ports
shut down by loopback detection.
Click Apply to update the global setting.
To manually reactivate a port:
Click Port Management > Error Recovery Settings.
The list of inactivated interfaces along with their Suspension Reason is displayed.
Select the interface to be reactivated.
Click Reactivate.
Cisco 500 Series Stackable Managed Switch Administration Guide
Port Management
Configuring Ports