LG LS-H0560CL Service Manual page 15

2) Connection of Pipings
1. Remove the installation plate.
• Pull the two '∆' marked portion of bottom of the
chassis and pull the installation plate out of
chassis.
2. Route the drain hose and the indoor tubing.
For right rear piping
3. Connect the pipings and the indoor tubing, and
drain hose and drain pipe.
• Do not connect the cable to the indoor unit.
Pipe Size
Liquid Side (1/4")
Gas Side (3/8")
• Wrap the insulation material around the connect-
ing portion.
• Glue up the connection portion of drain hose and
drain pipe.
4. Insert the pipings, the connecting cables and
the drain pipe throught the piping hole on the
wall.
Torque
1.8kg·m
4.2kg·m
—15—
Installation plate
Pull
Flare nut
Indoor unit tubing
Spanner
Plastic bands
Drain hose Drain pipe
Adhesive
Outdoor Indoor
Connecting cable
Connecting piping
Drain pipe
Pull
Pipings
Torque wrench
Insulation material