LG LS-H0560CL Service Manual page 13

2) Indoor unit installation
The mounting wall should be strong and solid
enough to prevent it from the vibration.
1. Mount the installation plate on the wall with
four Type "A" screws.
(if mounting the unit on the concrete wall, consider
using anchor bolts.)
• Always mount the installation plate horizon-tally
by aligning the marking-off line with using the
thread and a level.
2. Drill the piping hole with 70mm dia. holecore
drill.
• Line according to the arrows marked on lower the
left and the right side of the Installation Plate.
The meeting point of the extended line is the cen-
ter of the hole.
• Drill the Piping hole at either the right or the left
and the hole should be slightly slanted to the out-
door side.
Type "A" screw
Weight
The lower right side of Installtion Plate
Left rear piping
Hole center
ø70mm
Indoor
—13—
Installation Plate
Marking-off line
Thread
Right rear piping
Hole center
ø70mm
WALL
Outdoor