Setup Memories - Kawai MP11SE Owner's Manual

SETUP memories

The MP11SE's SETUP memories allow the entire instrument configuration, including selected sounds, section
volume levels, parameter settings, and EQ adjustments, etc. to be stored and recalled immediately at the touch of a
button. SETUPs are numbered 1~8, and arranged in 26 banks A~Z, allowing for a total of 208 individual memories.
This page explains how to select the bank and memory, and recall the SETUP.
 Turning SETUP mode ON or OFF
Press the SETUP section's ON/OFF button to turn SETUP mode
ON or OFF.
The LED indicators for the SETUP section's ON/OFF button and
selected SETUP memory will turn ON or OFF accordingly.
When SETUP mode is turned ON, a list of SETUPs for the current
bank will be briefly shown in the LCD display, with the selected
memory highlighted.
* The previously selected SETUP memory will be recalled automatically.
Current
bank
After a few seconds, the Play mode screen will be shown in the
LCD display, with the name of selected SETUP indicated.
Selected
SETUP
 Selecting SETUPs
While SETUP mode is turned ON:
Press the BANK  buttons to cycle through the available
SETUP banks.
The SETUP list for the selected bank will be briefly shown in the
LCD display.
Current
bank
While the SETUP list is shown in the LCD display:
Press the SETUP memory buttons to select the desired SETUP
memory.
Selected
SETUP
Example: To select bank B, press the BANK button twice.
Selected
SETUP
* SETUP memories from within the current bank can still be selected, even
when the bank list is not shown.
LED indicator ON:
SETUP mode is turned ON
LED indicator ON:
Selected SETUP memory
Example: To select SETUP memory 3, press the
SETUP memory button.
63