Reverb - Kawai MP11SE Owner's Manual

Overview of Internal Sections
3

Reverb

Reverb adds reverberation to the sound, simulating the acoustic environment of a recital room, stage, or concert
hall. The MP11SE features 6 high quality types of reverb.
Each sound section features independent REVERB ON/OFF and REVERB DEPTH controls, however the REVERB TYPE
(and associated settings) is common to all sections.
 Reverb types
Reverb type
Room
Lounge
Small Hall
Concert Hall
Live Hall
Cathedral
 Turning reverb ON or OFF
Press the desired sound section's REVERB button to turn the
reverb for that section ON or OFF.
The LED indicator for the sound section's REVERB button will
turn ON or OFF to indicate the current status of the reverb.
 Changing the reverb type and additional parameters
Press and hold the section's REVERB button.
The REVERB page of the EDIT menu will be shown in the LCD
display.
Common
parameters:
See page 38
Turn the four control knobs (A, B, C, D) to change the reverb type
and adjust additional reverb parameters.
Press and hold the REVERB button again to exit.
 Reverb parameters
Knob Parameter
A Type
B PreDelay
C Time
D Depth
22
Description
Simulates the ambiance of a small rehearsal room.
Simulates the ambience of a piano lounge.
Simulates the ambiance of a small hall.
Simulates the ambiance of a concert hall or theater.
Simulates the ambiance of a live hall or stage.
Simulates the ambiance of a large cathedral.
Description
Changes the type of environment.
Adjusts the delay time before the reverberation is applied.
Adjusts the decay length/speed of the reverberation.
Adjusts the depth of the environment (amount of reverberation).
LED indicator ON:
Reverb is turned ON
Type
Time
Value range
(see table above)
0 ~ 200 ms
300 ms ~ 10.0 s
0 ~ 127
PreDelay
Depth
(depending on type)