Controllers - Kawai MP11SE Owner's Manual

6

Controllers

1. Right Pedal
This parameter determines whether or not the right pedal of
the GFP-3 pedal unit is active for the selected zone.
3. Half Pedal Values
This parameter changes the half pedal ranges sent by the right pedal of the GFP-3 pedal unit for the selected zone.
This parameter is useful when using the MP11SE to control external tone generators (e.g. software pianos) that respond to damper pedal behaviour differently.
Half Pedal Value Value Range
Normal 0 ~ 127
(default)
High 0, 64 ~ 127
Low 0 ~ 63, 127
0, 50 100, 127
Mid High
~
0, 25 75, 127
Mid Low ~
4. Center Pedal
This parameter determines whether or not the centre pedal of
the GFP-3 pedal unit is active for the selected zone.
6. Left Pedal
This parameter determines whether or not the left pedal of the
GFP-3 pedal unit is active for the selected zone.
8. Pitch Bend
This parameter determines whether or not the pitch bend
wheel is active for the selected zone.
10. Modulation Wheel
This parameter determines whether or not the modulation
wheel is active for the selected zone.
When set to 'Reverse', the wheel's output values will be inverted.
o , o
n ff
Description
The damper pedal sends a full range of evenly distributed values.
The damper pedal sends a full range of evenly distributed values after the half-pedal point is reached.
The damper pedal sends a full range of evenly distributed values before the half-pedal point is reached.
The damper pedal sends a full range of evenly distributed values between 50 and 100.
The damper pedal sends a full range of evenly distributed values between 25 and 75.
o , o
n ff
o , o
n ff
o , o
n ff
o , r , o
n everse ff
2. Right Pedal Assign
This parameter selects the function assigned to the right pedal
of the GFP-3 pedal unit.
* This parameter is common for all four MIDI zones.
n
5. Center Pedal Assign
This parameter selects the function assigned to the centre pedal
of the GFP-3 pedal unit.
* This parameter is common for all four MIDI zones.
7. Left Pedal Assign
This parameter selects the function assigned to the left pedal of
the GFP-3 pedal unit.
* This parameter is common for all four MIDI zones.
9. Pitch Bend Range
This parameter sets the range of the pitch bend wheel in semi-
tone steps.
* The range differs for the internal sound (0 ~7) and MIDI (0~12) sections.
11. Modulation Wheel Assign
This parameter selects the function assigned to the MP11SE's
modulation wheel.
12. Modulation Depth Range
This parameter sets the range of the pitch modulation function
in steps of 600/127 cents.
cc#0 ~ cc#119, a
ftertoucH
, H , l , m H , m l
ormal igH ow id igH id
cc#0 ~ cc#119, a
ftertoucH
cc#0 ~ cc#119, a
ftertoucH
: 0 ~ 12
value
cc#0 ~ cc#119,
a
ftertoucH
: 0 ~ 127
value
ow
57