Table of Contents
Advertisement
Registration Memories
Registration Memories
Registration Memories
The Registration function allows the current instrument setup (sound selections, split point, reverb and effect
settings, and various other panel options) to be stored to a memory and conveniently recalled at the touch of a
button. There are two banks ("A" and "B") for each registration button, allowing up to 16 different registration
memories to be stored.
Registrations can also be loaded/saved to a USB memory device. Please refer to pages 117/122 for more information.
Functions and Settings stored in Registration memories
Functions
Selected sound
(including primary sound for each category)
Dual Mode / Split Mode / Four Hands Mode
Reverb, Effects
(Type, Settings)
Metronome
(Beat, Tempo, Volume)
1
Selecting a Registration memory
Entering Registration mode
Press the REGISTRATION button.
The LED indicator for the REGISTRATION button will turn on to
indicate that the registration function is in use.
Selecting a Registration memory
When the registration function is in use:
Press the
FUNCTION button to toggle between registration
memory bank "A" and "B".
Press a SOUND button to select the desired registration memory.
The name of the selected registration memory will be shown in
the LCD display.
Registration
name
Select
Bank A/B
Exiting Registration mode
Press the REGISTRATION button.
The LED indicator for the REGISTRATION button will turn off,
and the button panel will return to normal operation.
34
Settings
Basic Settings
Virtual Technician Settings
(including settings)
MIDI Settings
* Changes made to the Auto Power Off setting will be stored to User
Memory automatically.
* For a complete listing of the settings that can be stored to Registration
memories, please refer to pages 141~142.
Example: To select registration memory B-3 (when
bank "A" is selected), press the
then press the E.PIANO (memory 3) button.
(with exceptions)
FUNCTION button,
Advertisement
Table of Contents
