File Formats; Browse File Manager; Open A File Or Folder; Multi-Select - Pfaff creative icon User Manual

File Formats

Your creative icon™ machine can load the following file
formats:
• .VP3, .SHV, .DHV, .VIP, .HUS, .PEC, .PES, .PCS, .XXX,
.SEW, .JEF, .EXP, .10* and .DST (embroidery files)
• .SPX (stitch file)
• .VF3 (embroidery font file)
• .JOS (project files)
Note: Some versions of the embroidery files are not fully
supported by your machine.
Note: If the file type or file version is not supported by your
machine, or the file is damaged, it is shown in the selection
area as an unrecognized file.

Browse File Manager

Multi-Select

If you want to select several designs, stitches or fonts at
one time, touch the Multi-Select icon. While Multi-Select
is activated, touch the files you want to use. Copy and
Paste the selected files e.g. to another folder in File
Manager.
Note: If trying to load a combination of files/folders that is not
possible to load to the same destination a pop-up message will
be shown.
mySewnet™ Cloud Folder
Save designs, stitches and fonts to the mySewnet™ cloud
folder on the machine. If you are signed in to a
mySewnet™ account and connected to mySewnet™ your
saved files will be synchronized automatically with the
mySewnet™ cloud. Read about mySewnet™ cloud.
Store your designs, fonts and stitches in the mySewnet™
cloud folder or to a USB device connected to the USB
ports. The USB Device icon is only available when a USB
device is connected to your machine.
To display the content, touch the mySewnet™ cloud
folder or USB Device. Swipe with your finger upwards
and downwards to scroll and view the content. Design
files and font files are displayed as thumbnail images or
with an icon depending on if you have List View or
Thumbnail View selected.

Open a File or Folder

Touch a file to read information about the file in the file
information area. Touch & hold the file to load it.
If you load an embroidery font file, it will be loaded into
Embroidery Edit. If you load a stitch font file, it will be
loaded into Sequence Creator.
Touch & hold on a folder to open it. The content of the
folder will be shown in the selection area. The path of an
open folder is written in the current folder area.
199