Embroidery Foot Type; Twin Needle Options - Pfaff creative icon User Manual

Embroidery Foot Type

Select either the Dynamic Spring Foot 6D Free-Motion
or a Sensormatic Free-Motion Foot, e.g. 6A. It is very
important that the correct setting is selected for the
attached embroidery foot.
Embroidering with theActivStitch™ technology feature
and the Dynamic Spring Foot 6D is needed for good
embroidery results.
Some specific specialty techniques and/or accessories
do not support the use of the Dynamic Spring Foot 6D, e.
g. yarn couching and felting.
Dynamic Spring Foot 6D Free-Motion
When the Dynamic Spring Foot 6D is selected the
machine will lower the foot to hold the fabric at each
stitch. When a sensormatic foot is selected the machine
will lower the foot to a pivot height above the fabric.
When using a sensormatic foot the presser foot height
can be adjusted for improved performance when using
different weights of material and/or embroidery
threads.
Sensormatic Free-Motion Foot 6A
Note: The embroidery foot will be reset to Dynamic Spring
Foot 6D at the start of a new project or start of a new
embroidery session from the start page. Make sure you attach
the correct foot or change the setting.

Twin Needle Options

When a twin needle size is selected the ActivStitch™
technology feature will automatically use thread tension.
When embroidering with a twin needle the Straight
Stitch Needle Plate needs to be removed as it cannot be
used with a twin needle.
Twin Needle Options
Note: It is very important to activate the twin needle setting
when embroidering with a twin needle to prevent damage to
the machine.
126