Advertisement
REGULATORY NOTICE
10
FCC REQUIREMENTS
Part 15
This device complies with Part 15 of
the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful
interference, and
2. This device must accept any
interference received, including
interference that may cause
undesired operation.
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications.
However, there is no guarantee that
interference will not occur in a
particular installation. If this equipment
does cause harmful interference to
radio or television reception which can
be determined by turning the radio or
television off and on, the user is
encouraged to try to correct
interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet
on another circuit.
EXPOSURE TO RADIO
FREQUENCY RADIATION
The radiated output power of this
internal wireless radio is far below the
FCC radio frequency exposure limits.
Nevertheless, the wireless radio shall be
used as described in the manual.
The internal wireless radio operates
within guidelines found in radio
frequency safety standards
andrecommendations, which reflect the
consensus of the scientific community.
Plantronics therefore believes the
internal wireless radio is safe for use by
consumers. The level of energy emitted
is far less than the electromagnetic
energy emitted by wireless devices such
as mobile phones. However, the use of
wireless radios may be restricted in
some situations or environments, such
as aboard airplanes. If you are unsure
of restrictions, you are encouraged to
ask for authorization before turning on
the wireless radio.
NOTE: Modifications not expressly
approved by Plantronics, Inc. could void
the user's authority to operate the
equipment.
INDUSTRY CANADA NOTICE
Radio Equipment
The term "IC:" before the radio
certification number only signifies that
Industry Canada technical
specifications were met.
Operation is subject to the following
two conditions: (1) this device may not
cause interference, and (2) this device
must accept any interference, including
interference that may cause undesired
operation of the device. "Privacy of
communications may not be ensured
when using this telephone."
This product meets the applicable
Industry Canada technical
specifications of the RSS210.
PRODUCT REGISTRATION
REGISTER YOUR
PRODUCT ONLINE
This is not a condition of your
warranty, but will assist us in
providing the best possible service
and technical support for your
product.
Visit www.plantronics.com/
productregistration.
�����������
����������������
���������
���������������
�
�����������������
�������
�������������
����������
������������������
�����
������
�����������
�����
�����������������
����
�����������
���������������
�������������
��������������������
���������������
�������
To order please contact your Plantronics supplier call
go to
www.plantronics.com.
PLANTRONICS TECHNICAL
ASSISTANCE CENTER
For Bluetooth assistance and
accessibility information, call the
Plantronics Technical Assistance Center
(TAC)
866-746-4375,
or visit our
website at
www.plantronics.com.
������������������
��������������
������������������
����������������
������������������
�����������������
������������������
��������������
��������
������������������
�����������
������������������
�����������
������������������
�����������
������������������
���������������
������������������
������������
��������������
�������������
�����������������
������������������
�����
866-746-4375,
or
11
Advertisement
