Do Not Use Out-Bound Username In Register; Support For New Ddm16 And Dem16 Circuit Board Revisions; Mcd Interoperability Support; Microsoft Lync Integration Support - Mitel MiVoice Office 250 Manual Book

MiVoice Office 250 Engineering Guidelines
If the flag is set to No, the to/from/contact headers in the SIP register correspond to the
out-bound username. If the flag is set to Yes, the to/from/contact headers in SIP register
correspond to the trunk group Caller ID.

DO NOT USE OUT-BOUND USERNAME IN REGISTER

In Database Programming, a new flag, Do not use Out-bound Username in REGISTER, was
added. This flag controls the registration of a SIP call when upgrading to Release 6.0 SP2.

SUPPORT FOR NEW DDM16 AND DEM16 CIRCUIT BOARD REVISIONS

New hardware revisions of the DDM16 and DEM16 circuit boards are fully supported by the
Release 6.0 SP2 software.

MCD INTEROPERABILITY SUPPORT

The Mitel 5000 Release 6.0 SP2 maintains all current support with the published MCD
Interoperability.

MICROSOFT LYNC INTEGRATION SUPPORT

The Mitel 5000 Release 6.0 SP2 now has support for Microsoft Lync via the Micollab 6.0 product.
Refer to the MiCollab 6.0 documentation for details on this integration.

SUPPORT FOR NEW DEVICES

The Mitel 5000 Release 6.0 SP2 supports the following new devices:
• The 5610 IP Dect Phone is now supported via a Media Border Gateway connection to the
Mitwl MiVoice Office 250.
• New models of the 5320e phone have a backlit display. The Mitel 5000 v6.0 SP2 contains
new firmware for the 5320e IP phones.
• Apple IOS support via a Media Border Gateway connection to the MiVoice Office 250. Refer
to the Media Border Gateway and IOS documentation for details.
• Mitel Phone Manager (formerly by Xarios).
UPS MONITORING SUPPORT CHANGES ON 6.0 SP2 AND LATER
SOFTWARE
Effective Release 6.0 SP2, monitoring capabilities for previously approved suppliers of UPS
units cannot be guaranteed to be compatible with the UPS Monitoring feature. See the MiVoice
Office 250 Installation Manual for details.

MIVOICE OFFICE 250 V6.0 SP1 NEW FEATURES

ENGINEERING GUIDLEINES

The Engineering Guidlines (this document) is now a stand-alone document. It was previously
contained as an appendix in the MiVoice Office 250 Installation Manual.
8