Overview Of Controls; Preparing The Remote Control - Panasonic SC-UX100 Owner's Manual

SC-UX100 PP TQBJ0973 En.fm Page 6 Saturday, August 13, 2016 5:06 PM

Overview of controls

Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same.
A
Standby/on switch [`], [1]
Press to turn the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a
small amount of power.
B
Select the audio source
On the main unit:
To start Bluetooth ® pairing, press and hold [
C
Basic playback control
D
View the setup menu
E
View the content information
F
Select or confirm the option
G
Open or close the disc tray
H
Decrease the brightness of the display panel
The illumination is also turned off.
To cancel, press the button again.
I
Adjust the volume level
J
Mute the sound
To cancel, press the button again.
"MUTE" is also canceled when you adjust the volume
or when you turn off the system.
K
View the play menu
L
Select the sound effects
M
Select the jukebox
N
Display panel
O
USB port ( )
P
Disc tray
Q
Remote control sensor
Distance: Within approximately 7 m (23 ft)
Angle: Approximately 20° up and down, 30° left and
right
6
Confidential
Until: 9 Jan 2017
digital printing

Preparing the remote control

].
Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with
those in the remote control.