Overview of controls
Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same.
Standby/on switch [`], [1]
A
Press to turn the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a
small amount of power.
Select the audio source
B
On the remote control:
Press the corresponding button to select the source.
[
]: BLUETOOTH
[USB/CD]: USB
CD
[RADIO]: FM
On the main unit:
Select "BLUETOOTH" as the audio source
To start Bluetooth
pairing or disconnect a Bluetooth
®
device, press and hold the corresponding button.
Basic playback control
C
View the setup menu
D
View the content information
E
Select or confirm the option
F
Open or close the sliding door
G
Decrease the brightness of the display panel
H
To cancel, press the button again.
Adjust the volume level
I
Top view
Mute the sound
J
To cancel, press the button again.
"MUTE" is also canceled when you adjust the volume
or when you turn off the system.
View the play menu
K
Select the sound effects
L
USB port (
M
Sliding door
N
Display panel
O
Remote control sensor
P
Distance: Within approximately 7 m (23 ft)
Angle: Approximately 20° up and down, 30° left
)
and right
5