Table of Contents
Advertisement
Show Commands
Output
Router-Advertisement Table Output — The following table describes the output fields for router-
advertisement.
Rtr Advertisement
Tx/Last Sent
Nbr Solicitation
Tx
Nbr Advertisement
Tx
Rtr Advertisement
Rx
Nbr Advertisement
Rx
Max Advert Inter-
val
Managed Config
Reachable Time
Retransmit Time
Link MTU
Rtr Solicitation
Rx
Nbr Solicitation
Rx
Min Advert Inter-
val
Other Config
Router Lifetime
Page 168
prefix-length:
Label
The number of router advertisements sent and time since they were
sent.
The number of neighbor solicitations sent and time since they were
sent.
The number of neighbor advertisements sent and time since they were
sent.
The number of router advertisements received and time since they
were received.
The number of neighbor advertisements received and time since they
were received.
The maximum interval between sending router advertisement mes-
sages.
True — Indicates that DHCPv6 has been configured.
False — Indicates that DHCPv6 is not available for address config-
uration.
The time, in milliseconds, that a node assumes a neighbor is reachable
after receiving a reachability confirmation.
The time, in milliseconds, between retransmitted neighbor solicitation
messages.
The MTU number the nodes use for sending packets on the link.
The number of router solicitations received and time since they were
received.
The number of neighbor solicitations received and time since they
were received.
The minimum interval between sending ICMPv6 neighbor discovery
router advertisement messages.
True — Indicates there are other stateful configurations.
False — Indicates there are no other stateful configurations.
Displays the router lifetime in seconds.
d: [0 — 255]D
1 — 128
Description
7710 SR OS Router Configuration Guide
Advertisement
Table of Contents
