Notes On The Touch Screen - Sony NWZ-Z1040 Help Manual

WALKMAN Help Guide | Notes on the touch screen
Help Guide
NWZ-Z1040/Z1050/Z1060
Troubleshooting
How to Use
What You Can Do
Parts Description
Setup
Enjoying Music
Enjoying Videos / Photos
Application
Android
Connections
Settings
Other Operations
Notifications
Announcements
© 2012 Sony Corporation
file:///F|/...20and%20Settings/editoralaya/Desktop/imx_20111124132952_GB_PC/4-408-194-11(1)/eng/contents/02/01/03/03.html[11/24/2011 4:09:33 PM]

Notes on the touch screen

The following are notes regarding the touch screen and LCD screen.
Notes regarding the touch screen
Your "WALKMAN" uses a capacitive touch screen. Tap the screen directly with your
fingertip. Do not scratch it or tap it with sharp objects such as a needle, pen, or
fingernail. You cannot operate the touch screen with a stylus.
If you touch the touch screen with gloved fingers, it may operate incorrectly or may not
operate at all.
Do not operate your "WALKMAN" with objects on the touch screen.
If the touch screen is touched by objects other than your fingertip, it may not react
correctly.
Do not put the touch screen close to other electrical devices. Electrostatic discharges
can make the touch screen malfunction.
If there are water droplets on the touch screen, or if you touch it with wet fingertips, the
touch screen may not react correctly.
Do not put the touch screen close to water. The touch screen may malfunction in humid
conditions or when exposed to water.
Notes regarding the LCD screen
Do not press hard on the LCD screen. Doing so may cause unevenness or damage.
Do not leave the LCD screen in direct sunlight. Be sure to block direct sunlight when
using your "WALKMAN" near a window.
Using your "WALKMAN" in low temperature conditions may produce a residual image on
the LCD screen. This does not indicate a malfunction. The screen will return to normal
when your "WALKMAN" returns to normal temperature.
A residual image may appear on the LCD screen if the same image is displayed for an
extended period of time. The residual image will eventually disappear.
The LCD screen becomes warm during operation. This is normal and does not indicate
a malfunction.
The LCD screen is manufactured using high-precision technology. You may, however,
see tiny black points and/or bright points on the LCD screen. This is a normal result of
the manufacturing process and does not indicate a malfunction.
The LCD screen is made of glass. If the glass is damaged (cracked, etc.), do not touch
the touch screen nor try to repair it by yourself. Handle the LCD screen carefully as it is
vulnerable to dropping or mechanical shock. The warranty does not cover any damages
caused by customers due to incorrect handling.
Related topic
How to use the touch screen
Caring for the touch screen
Search
Back | Back to Top