Appendix F: Programming Via The Hand Programmer; Parameter Menu Structure; The Lcd Display; Using The Hand Programmer - Siemens SITRANS LR200 Instruction Manual

Appendix F: programming via the hand
programmer
Although the complete range of parameters is only accessible via PDM
and adjust many of the parameters via the Siemens Milltronics infrared hand
programmer.
• For the complete list of parameters, see
page 85.
Appendix G: LCD menu structure
•
via the hand programmer, preceded by the menu number.

Parameter Menu Structure

The parameters are organized into function groups, and arranged in a 4-level menu
structure. For example:
1. Identification
1.2. Configuration

The LCD Display

Details on the LCD display are given in

Using the hand programmer

Note:
For Quick Access to parameters via the hand programmer, press the mode key to
activate PROGRAM mode, then key in the menu number.
Detailed instructions on using the hand programmer start on page 17, and on doing a
Quick Setup start on page 21.
The following pages give details on how to programme some of the more complex
SITRANS LR 200 parameters via the hand programmer.

Security

Local operation enable

Local Operation can be enabled or disabled via PDM. Go to Identification > Device > Local
Operation Enable and select the desired setting.
1.
Please see page 24 for
7ML19985HP01 SITRANS LR 200 (PROFIBUS PA) – INSTRUCTION MANUAL
on page 65 gives a list of all parameters accessible
1.2.2. Remote Lock.
Startup
Remote operation via PROFIBUS PA
Appendix K: Parameter Descriptions
, page 16 onwards.
1
, you can access
on
Page 61