Initialization Method; Initializing A Controller; Initializing A Ckd Absodex Driver - Omron NJ501 series Connection Manual

Nj-series;nx-series

Hide thumbs Also See for NJ501 series:

Table of Contents

8. Initialization Method

The setting procedures in this guide are based on the factory default settings.

Some settings may not be applicable unless you use the devices with the factory default

settings.

To initialize a Controller, it is necessary to initialize a CPU Unit.

Change the operating mode of Controller to PROGRAM mode and select Clear All Memory

from the Controller Menu in Sysmac Studio. The Clear All Memory Dialog Box is displayed.

Check the contents and click OK.

For information on how to initialize a CKD ABSODEX Driver, refer to 3-2-1-4 ABSDEX

initialization of the INSTRUCTION MANUAL ABSODEX AX Tools for Windows

TS-Type, TH-Type, MU-Type and XS-Type Drivers (SMF-2005-A).

8．Initialization Method

Common for

Table of Contents

Nj301 series Nx701 series Nj101 series Nx1p2 series