Bagel Function - Breville BOV650XL /B Instruction Book

OPERATING YOUR BREVILLE COMPACT SMART OVEN™ – TOAST
b) To change the number of slices,
press the center of the TEMP/TIME
(Darkness/Slices) dial until the LCD
screen displays a flashing 'SLICES'.
Turn the dial to the left to reduce the
number of slices, or to the right to
increase the number of slices. The
number of slices range from '1' to '4'.
NOTE
Your customized TOAST browning
setting and number of slices will
remain in the memory of the oven until
you change them or unplug the oven
from the power outlet. When the oven
is plugged back into the power outlet,
the TOAST function will automatically
return to the preset browning setting
'4' and preset number of slices '2'.
6. Press the START/CANCEL button
to activate this setting. The button
surround will illuminate red, the oven
alert will sound and the LCD screen will
illuminate orange.
7. The timer will be displayed and begin to
count down. The time can be adjusted
during the toasting cycle by turning the
TEMP/TIME dial.
NOTE
Element IQ™ will automatically
adjust the toasting time depending
on the heat already present inside
the oven. For example, if the oven
is already warm after one cycle of
toasting, the toasting time for the
second cycle will be less.
22
NOTE (continued)
During the toasting cycle,
condensation may form on the oven
door and steam may be emitted. This
is normal. Condensation and steam
occur as a result of the moisture
content of the bread. Freshly baked
and frozen breads generally produce
more condensation.
8. At the end of the toasting cycle,
the oven alert will sound three times.
The START/CANCEL button surround
will no longer illuminate red and LCD
screen will illuminate blue.
IMPORTANT
The outer surface of the oven,
including the oven door, is hot during
and after operation. Always use
protective hot pads or insulated oven
mitts when inserting, removing or
handling items from the oven.
9. The toasting cycle can be stopped at any
time by pressing the START/CANCEL
button. This will cancel the cycle. The
button surround illumination will go out
and the LCD screen will illuminate blue.
NOTE
Default temperatures and times
shown in the illustrations in this
section may vary from those displayed
on your oven.
OPERATING YOUR BREVILLE COMPACT SMART OVEN™ – BAGEL

BAGEL FUNCTION

Elements
Top and bottom heating elements cycle on
and off to regulate the correct temperature.
Rack Position
Middle rack height position.
Optional Settings
FROZEN FOODS button.
The BAGEL function crisps the insides of
your cut bagel while only lightly toasting the
outside. This function is also ideal for toasting
thick sliced speciality breads which require
one side to be toasted more than the other.
NOTE
If you like your bagel halves equally
crisp on both the top and bottom,
we recommend using the TOAST
function to toast your cut bagel.
1. Insert the wire rack into the top
rack height position. The wire rack
should be positioned with the spokes
facing upwards.
2. Slice each bagel into two equal halves
3. If toasting 1-2 bagel halves, center the
halves on the wire rack. If toasting 3-4
halves, evenly space them with 1-2
halves at the front of the wire rack and
1-2 halves at the back of the rack.
NOTE
The upside of the bagel must always
face upwards towards the top heating
elements. This allows the topside to
be crisp while the crust is only lightly
toasted.
NOTE
For bagels, change the rack to
the middle rack height position,
cut the bagel in half, lengthways.
The upside(cutside) of the bagel
must always face upwards towards
the top heating elements - so the
topside(cutside) becomes crisp while
the crust is only lightly toasted.
4. Close the oven door.
5. Turn the FUNCTION dial until the
indicator reaches the BAGEL function.
The left figure on the LCD screen
indicates the preset browning or
'Darkness' setting '4', while the right
figure on the LCD screen indicates the
preset number of bagel halves '2'.
6. The browning setting and number of
bagel halves can be adjusted before or
during the bagel cycle.
23