Table of Contents
Advertisement
To use the auxiliary inputs of the RSE system, connect
an external auxiliary device to the color-coded A/V
jacks and turn both the auxiliary device and the video
screen power on. If the video screen is in the DVD
player mode, pressing the AUX button on the remote
control will switch the video screen from the DVD player
mode to the auxiliary device. The radio will play the
audio of the connected auxiliary device by sourcing to
auxiliary.
How to Change the RSE Video Screen
Settings
The screen display mode (normal, full, and zoom),
screen brightness, and setup menu language can be
changed from the on screen setup menu. To change any
feature, perform the following:
1. Press the display menu button on the remote
control.
2. Use the remote control menu navigation arrows and
the enter button to use the setup menu.
3. Press the display menu button again to remove the
setup menu from the screen.
3-26
Audio Output
Audio from the DVD player or auxiliary inputs may be
heard through the following possible sources:
•
Wireless Headphones
•
Vehicle Speakers
•
Vehicle wired headphone jacks, if your vehicle has
this feature.
The RSE system will always transmit the audio signal
by infrared to the wireless headphones, if there is audio
available. See "Headphones" previously for more
information.
The RSE system is capable of outputting audio to
the vehicle speakers by using the navigation system.
The RSE system may be selected as an audio source
on the navigation system if the RSE system power is on.
Once the RSE system is selected as an audio source
on the navigation system, adjust the speaker volume,
if necessary. If the RSE system power is not on,
the RSE system will not be an available source on
the radio.
The RSE system is capable of outputting audio to the
wired headphone jacks (if equipped).
Advertisement
Table of Contents
