Table of Contents
Advertisement
DVD Map Disc Messages
If Disc Read Error appears on the display and/or the
map disc comes out, it could be for one of the following
reasons:
•
If the map disc was installed into the CD slot.
See "Installing the DVD Map Disc" previously.
•
It is very hot, when the temperature returns to
normal, the map disc should play.
•
You are driving on a very rough road. When the road
becomes smoother, the map disc should play.
•
The map disc is dirty, scratched, wet,
or upside down.
If any error occurs repeatedly or if an error cannot be
corrected, contact your dealer/retailer.
Ejecting the DVD Map Disc
When the DVD map disc is not loaded, you will not be
able to use the navigation portion of the system.
1. Press the MENU key to enter the Menu options,
then press the MENU key repeatedly until Nav is
selected or touch the Nav screen button.
2. Touch the Map Database Information screen
button.
2-6
3. Touch the Change screen button. The screen will
tilt, exposing the map DVD slot and the map DVD
will eject. Pull the disc out.
4. Touch the Close screen button. The screen will
close.
Handling the DVD Map Disc
When handling the DVD map disc, be careful of the
following:
•
Handle the disc very carefully to avoid
contamination or flaws. Signals may not read out
properly if the disc gets contaminated or flawed.
•
If the disc gets soiled, use a soft cloth to gently wipe
it out from the center of the disc to the outside.
Do not use photographic record cleaner, solvents,
or other cleaners.
•
Do not use the disc to rest on while writing or
drawing using any writing utensil or attach a seal
to any of the sides or the disc.
•
Do not keep the disc in direct sunlight, high
temperatures, or humidity.
•
After using the disc, place it back into the
original case.
Advertisement
Table of Contents
