Table of Contents
Advertisement
Storing Radio Station Presets
To set preset radio stations, do the following:
1. Press the
O
(power) knob to turn the system on.
2. Press the AUDIO hard key and select the desired
band (AM, FM1, FM2, XM1, or XM2 (if equipped)).
f
3. Use the
(tune) knob or the SEEK arrows to tune
to the desired station.
4. Press and hold one of the five preset screen
buttons, at the bottom of the screen, until you hear a
beep or see the station displayed on the selected
preset button.
5. Repeat the steps for each preset.
See "Storing Preset Stations" under Navigation Audio
System on page 3-2 for more information.
Setting the Time
See "Analog Clock" in the Index of your vehicle's owner
manual.
Setting the Search Area, Entering an
Address and Point of Interest, and
Storing Preset Destinations
Before entering an Address, Point of Interest, Home, or
Preset Destination, select the appropriate region that
contains the final destination. Your vehicle must
be in PARK (P) to perform this operation.
Setting the Search Area
To set the search area, do the following:
1. If the radio is already on with a map disc inserted,
skip to Step 5.
2. Press the
O
(power) knob to turn the system on.
3. Insert the DVD map disc. See "Installing the
Map DVD" under Maps on page 2-4 for more
information.
4. A caution may appear. Touch the OK screen button
to proceed.
5. Press the DEST hard key.
6. Press the Change Search Area screen button.
7. Select the appropriate region numbered screen
button that contains your final destination.
The system will return to the Destination Entry menu.
See Destination on page 2-14 for more information.
1-7
Advertisement
Table of Contents
