Chromatic Bend - Roland V-synth GT Supplementary Manual

Chromatic Bend

A newly added Chromatic Bend function lets you use the pitch bend lever to change the pitch in semitone steps. This
makes it easy to recreate a variety of pitch transitions, such as those produced when using the slide technique on a
guitar. When used with Vocal Designer, this lets you simulate the result of using pitch-correction software on a vocal
performance.
1.
Touch <MENU> in the upper right of the Patch Play screen.
fig.PatchMenu2.eps
2.
In the pull-down menu, touch <Patch Common> to open the Patch Common screen.
3.
Touch <Bender> tab to open the Bender Setting Screen.
fig.ToneBender2.eps
4.
Specify the desired Chromatic Bend settings for the Lower Tone and the Upper Tone.
Parameter
Chromatic Bend Down
Chromatic Bend Up
22
Value Description
If this is ON, the Chromatic Bend function will be active when you
OFF, ON
move the pitch bend lever toward the left to bend down.
If this is ON, the Chromatic Bend function will be active when you
OFF, ON
move the pitch bend lever toward the right to bend up.