Settings menu
Rinse aid
For best results the rinse aid dosage
can be adjusted.
The dosage can be set between
approx. 0-6 ml.
The factory setting is 3 ml of rinse aid.
If spots appear on crockery and
glassware:
– Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
– Decrease the rinse aid dosage.
Select the desired amount of rinse aid
and press the middle button to
confirm.
72
Buzzer
When the buzzer is activated, an
audible tone sounds at the end of a
programme and when there is a fault.
Buzzer at end of programme
You will hear the buzzer at the end of a
programme in bursts of four with a
short pause in between. The buzzer will
continue to sound for up to an hour if
you do not switch the dishwasher off.
Buzzer when there is a fault
In the event of a fault, the buzzer will
sound four times in intervals without a
pause.
The buzzer which sounds when there
is a fault cannot be deactivated.
Setting the buzzer volume
There are seven different volume
settings. If no volume is selected, the
buzzer is deactivated.
Select the desired volume and press
the middle button to confirm.