Switching On; Selecting A Programme; To Start A Programme - Miele PG 8083 SCVi Operating Instructions Manual

Switching on

 Open the stopcock, if it is closed.
 Make sure the spray arms can rotate
freely.
 Close the door.
 Switch the dishwasher on with the 
button.
The ECO programme (which is the
factory default programme) will appear
in the display and the appropriate
indicator light will come on.
After a short while, the estimated
running time for the programme will
appear in the display.
You can also change the setting to the
programme you last used (see "Settings
menu, Programme preselection").

Selecting a programme

Choose your programme according to
the type of load and how dirty it is.
The different programmes and their
uses are described in the Programme
chart later on in this booklet.
 Select the programme required with
the  button.
The indicator light next to the
programme selected will come on.
When the indicator light next to 
lights up, you can select further
programmes using the > button.
You can now select additional
functions (see "Additional functions").

To start a programme

 Start the programme by closing the
door.
The In-operation indicator comes on to
show that a programme has been
started.
If any additional functions are selected,
the appropriate indicators will also light
up.
A programme should only be
cancelled in the first few minutes, if
at all.
Important programme stages (e.g.
reactivating the water softener) could
otherwise be omitted.
Operation
37