Battery Installation–Farm Play Set; Battery Notice - VTech Toot-Toot Animals Farm User Manual

BATTERY INSTALLATION – FARM PLAY SET
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back
of the electronic barn. Use a coin or a
screwdriver to loosen the screw.
3. Install 2 new AA (AM-3/LR6) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries
is recommended for maximum
performance.)
4. Replace the battery cover and tighten
the screw to secure.

BATTERY NOTICE

• Use new alkaline batteries or fully charged NI-MH (Nickel Metal-
hydride) rechargeable batteries for best performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
7