Using The Features; Basic Operation - Polaroid FLM-1911 Owner's Manual

USING THE FEATURES

Basic Operation

Turning the TV On and Off
1
After connecting a CATV or antenna to your LCD TV, and turn the POWER SWITCH of rear
on, an amber LED light indicates when the LCD TV is activated.
2
Press the button, the LED green light indicates on.
POWER
3
Press the button, the LED amber light indicates off .
POWER
Select Source
Press the button to display the selection signal on the screen.
INPUT
Select TV Channel
1
Press the button on the remote control and the
CH+/-
TV to select channel.
2
Press the buttons then press the
0~9
the selection channel No.
3
Press the button on the remote control to swap the channel between the current
JUMP
channel No. and the previous channel No.
Adjusting the Volume
Press the button on the remote control or the
VOL +/–
adjust the volume.
To Mute the Sound
1 Press and the sound cuts off .
MUTE
2 To turn mute off , press the
Sleep Timer
Press the button continuously to select the sleep timer or turn the sleep timer from the
SLEEP
OFF,15,30,45,60,90 and 120 minutes; when the LCD TV has been reached the set time, it will
automatically turn off . If the TV has no input signal, the screen will appeared blue screen and
display NO Signal; The TV will automatically change stand by after 15 minutes.
USING THE FEATURES
button to input the channel No. and enter into
ENTER
button again, or simply press the
MUTE
20
▲/▼ button on the LCD
CHANNEL
button on the LCD TV to
VOLUME +/-
buttons.
VOL +/-
TV