Installation Guideline - Daikin FTN25JXV1 Technical Manual

Installation Guideline

Sharp edges and coil surfaces are potential injury hazard. Avoid from contact with them.
Installation Diagram
Indoor unit
Front panel
50mm or more from walls
(on both sides)
Outdoor Unit
Outdoor Clearance
If the condensing unit is operated in an atmosphere containing oils (including machine
oils), salt (coastal area), sulphide gas (near hot spring, oil refi nery plant), such as
A
AIR INLET
ALL MODELS
Minimum Distance
30mm or more from ceiling
M4 x 12L
Air filter
Opening service lid
Service lid is opening/closing
type.
Opening method
1) Remove the service lid
screws.
2) Pull out the service lid
diagonally down in the
direction of the arrow.
3) Pull down.
substances may lead to failure of the unit.
B
AIR DISCHARGE
Caulk pipe hole
gap with putty.
Service lid
C
AIR INLET
A B
300 mm 1000 mm
Application Information
Cut thermal insulation pipe
to an appropriate length and
wrap it with tape, making
sure that no gap is left in the
insulation pipe's cut line.
Wrap the insulation pipe with the
finishing tape from bottom to top.
D
SERVICE SPACE
C D
300 mm 500 mm
8