Capacities And Specifications - 3.7L - Ford Mustang 2016 Owner's Manual

Note: Ford recommends using DOT 4 Low
Viscosity (LV) High Performance Brake Fluid
or equivalent meeting WSS-M6C65-A2. Use
of any fluid other than the recommended
fluid may cause degraded brake
performance and not meet the Ford
performance standards. Keep brake fluid
clean and dry. Contamination with dirt,
water, petroleum products or other
materials may result in brake system
damage and possible failure.

CAPACITIES AND SPECIFICATIONS - 3.7L

Capacities
The air conditioning refrigerant system contains refrigerant R-134a under high
pressure. Opening the air conditioning refrigerant system can cause personal injury.
Have the air conditioning refrigerant system serviced only by qualified personnel.
Engine oil
Engine coolant
Brake fluid
Rear axle fluid
Rear axle friction modifier
Automatic transmission fluid
Manual transmission fluid
Windshield washer fluid
Fuel tank
A/C refrigerant
A/C refrigerant compressor oil
*
Approximate dry fill capacity. Actual amount may vary during fluid changes.
Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing
Capacities and Specifications
WARNING
Item
*
*
Note: Automatic transmissions that require
MERCON LV transmission fluid should only
use MERCON LV transmission fluid. The use
of any other fluid may cause transmission
damage.
6.0 qt (5.7 L)
12.4 qt (11.7 L)
Between MIN/MAX on brake fluid reservoir
3.2 pt (1.5L)
3.28 fl oz (97 ml)
12.0 qt (11.4 L)
2.7 qt (2.6 L)
Fill as required
16.0 gal (60.6 L)
21 oz (0.6 kg)
3.4 fl oz (100.5 ml)
282
Capacity