Ford TRANSIT 2017 Owner's Manual page 281

WARNINGS
Chock the diagonally opposite wheel
to the punctured tire with an
appropriate block or wheel chock. A
wheel chock may be located in the B-pillar
or in a storage compartment in the front
right-hand side stepwell.
Make sure that the arrows on
directional tires point in the direction
of rotation when your vehicle is
moving forward. If you have to fit a spare
tire with the arrows pointing in the opposite
direction have the tire refitted as soon as
possible.
1. Insert the flat end of the lug wrench
between the wheel rim and the wheel
trim and carefully remove the wheel
trim.
2. Use the locking lug nut key to loosen
the locking lug nut.
3. Loosen the remaining lug nuts, but do
not remove them.
4. Raise your vehicle until the tire is clear
of the ground.
5. Remove the lug nuts and the road
wheel.
Note: Do not lay alloy road wheels face
down on the ground.
Installing a Road Wheel
WARNINGS
Use only approved wheel and tire
sizes. Using other wheel and tire sizes
could damage your vehicle and will
make the National Type Approval invalid.
Make sure there is no lubrication
(grease or oil) on the threads or the
surface between the wheel lugs and
nuts. This can cause the lug nuts to loosen
while driving.
Transit (TTH) Canada/United States of America, HK3J 19A321 AA enUSA, Edition date: 04/2016, First Printing
Wheels and Tires
mounting system. This damage could
allow the wheels to come off when your
vehicle is moving.
1.
E70961
2. Install all of the lug nuts and partially
3. Lower your vehicle and remove the
278
WARNINGS
Make sure the wheel and hub
contact surfaces are free from
foreign material.
Never use wheels or lug nuts
different than the original equipment
as this could damage the wheel or
Install the wheel.
1
3
5
6
4
2
tighten them in the sequence shown.
vehicle jack.
4
2
1
3
5