Sub Delay; Pedal Fx - Boss GT-1 Parameter Manual / Sound List

SUB DELAY

This is a delay with the maximum delay time of 1,000 ms. This
effect is useful for making the sound fatter.
Parameter Value
Use this to choose the type of delay.
MONO
TYPE
PAN
TIME 1 ms–1000 ms,
BPM ˜ – ¸
(DELAY TIME)
FEEDBACK 0–100
E.LEVEL
0–120
(EFFECT LEVEL)
630 Hz–12.5 kHz,
HIGH CUT
FLAT
TAP TIME *1 0–100%
D.LEVEL
0–100
(DIRECT LEVEL)
*1 Setting available when TYPE is set to PAN.
Explanation
Use this to choose the type of delay.
Provides a tap delay effect that divides
the delay time between the left and right
channels.
Adjusts the delay time.
* When set to BPM, the value of each
parameter will be set according to the
value of the "MASTER BPM" specified
for each patch. This makes it easier
to achieve effect sound settings that
match the tempo of the song.
* If, due to the tempo, the time is longer
than the range of allowable settings, it
is then synchronized to a period either
1/2 or 1/4 of that time.
Adjusts the volume that is returned to the
input. Higher settings will result in more
delay repeats.
Adjusts the volume of the delay sound.
This sets the frequency at which the high
cut filter begins to take effect. When FLAT
is selected, the high cut filter will have no
effect.
Adjusts the delay time of the left channel
delay. This setting adjusts the L channel
delay time relative to the R channel delay
time (considered as 100%).
Adjusts the volume of the direct sound.

PEDAL FX

You can control the wah effect or get a pitch bend effect in
real time by adjusting the [EXP] pedal or the expression pedal
connected to the CTL 2,3/EXP 2 jack.
Parameter Value
Selects the type.
CRY WAH
VO WAH
FAT WAH
LIGHT WAH
7STR WAH
(7STRING WAH)
TYPE
RESO WAH
PEDAL BND
CRY WAH–RESO WAH
Parameter Value
PDL POS
0–100
(PEDAL POSITION)
PDL MIN (PEDAL MIN)
0–100
PDL MAX (PEDAL MAX) 0–100
LEVEL
0–100
PEDAL BEND
* Because of the need to analyze the pitch, chords (two or more
sounds played simultaneously) cannot be played.
Parameter Value
PITCH -24–+24
PDL POS
0–100
(PEDAL POSITION)
LEVEL 0–100
Explanation
This models the sound of the CRY BABY
wah pedal popular in the '70s.
This models the sound of the VOX V846.
This is a wah sound featuring a bold tone.
This wah has a refined sound with no
unusual characteristics.
This expanded wah features a variable
range compatible with seven-string and
baritone guitars.
This completely original effect offers
enhancements on the characteristic
resonances produced by analog synth
filters.
This lets you use the pedal to get a pitch
bend effect.
* Because of the need to analyze the
pitch, chords (two or more sounds
played simultaneously) cannot be
played.
Explanation
Adjusts the position of the wah pedal. This
parameter is used after it's been assigned to
an EXP Pedal or similar controller.
Selects the tone produced when the heel of
the EXP Pedal is depressed.
Selects the tone produced when the toe of
the EXP Pedal is depressed.
Adjusts the volume of the effect sound.
Explanation
This sets the pitch at the point where the
EXP Pedal is all the way down.
Adjusts the pedal position for pedal
bend. This parameter is used after it's
been assigned to an EXP Pedal or similar
controller.
Adjusts the volume of the pitch bend sound.
EFFECT
11