________ Safety Precautions WARNING: To reduce the risk of fire or shock hazard, do not expose this DVD player to rain or moisture. To reduce risk of electrical shock, do not remove cover or back, no user serviceable parts inside.
DVD player. - The DVD player is suddenly moved from a cold place to a warm place. - A room is heated while the DVD player starts operating, or the DVD is placed by an air-conditioner.
Function Features 1. EXCELLENT SOUND Dolby Digital delivers great sound. 2. HIGH RESOLUTION MPEG2 decoding format achieves more than 500 lines of horizontal resolution. 3. SPECIAL FUNCTIONS Supports multi-angle, excessive language caption and parental-lock. 4. COMPATIBILITY Plays DVD, CD, CD-R, CD-RW, PICTURE CD and MP3 discs.
Parts Introduction DVD Player 1. OPEN button 2. Remote sensor 3. Disc cover 4. Lights red when the power switch is on. 5. Lights green when the player is in operation. 6. ENTER button 7. Direction buttons 8. TITLE button 9.
Direction buttons -Press to select menu items. 5. ENTER button -Press to confirm the items or setting. 6. SETUP button -Press to access the DVD player’s setup menu. 7. 0-9 number buttons -Select numbers by pressing these buttons. PREV SKIP button -Press to go to beginning of current track.
Page 8
Remote Control NEXT SKIP button -Press to go to next chapter. 10. SUBT button -When a DVD is playing, press to select a subtitle language or to turn subtitles off. 11. ANGLE button -Press to access various camera angles (if the DVD disc contains multiple camera angles).
DVD player to is switched off and unplugged from the power supply. 2. The easiest way to connect the DVD player to a television is via the supplied Audio/Video connections. Connect the audio/video cable from the DVD player to the TV’s audio/video inputs.
Playback Preparations Using the Remote Control Referring to the drawing above, take the back cover off of the remote control and remove the empty battery receptacle. Prior to shipping, a separating film was applied to the battery. Remove this film. Insert the battery into the receptacle and insert the receptacle into the remote.
The operating method of some DVD discs is specified by the software maker. Please refer to the instruction manual of the disc. The DVD Player will play most recordable (CD-R) or erasable (CD-RW) CDs, but playback of CD-R or CD-RW discs created on a computer requires proper formatting and finalization of the disc for audio playback.
The player is supplied with a switching power adapter. 1. Connect AC adaptor to the side of the DVD player in the slot marked “Power In”. 2. Connect the rabbit joint end of the AC adaptor to the power cord.
Power Supply Using and Charging the Battery Pack Charge the Battery Pack before using it the first time. Charging time is normally between 3-4 hours. Do not charge the Battery Pack more than 4 hours as it could reduce service life.
Detaching Battery Pack Detaching Battery Pack from the unit: If the player is not going to be used for a long period of time, we recommend that you detach the Battery Pack. Even if the unit is powered down, the unit is still consuming some power in STANDBY mode.
Basic Operation Please read these instructions carefully before using your player for the first time. Turn on the player’s power by switching the POWER switch on the side of the player to “ON”. Press OPEN button on front panel to open the disc cover. Remove the lens cover.
Basic Operation Stop During playback, press the STOP button on the remote control to stop playing. Press the PLAY button, then the player will play from the point where it stopped. Mode During playback, press the mode button on the control panel to change the aspect ratio on the screen.
System Setup GENERAL SET-UP You can change the default settings to customize performance to your own preference. 1. Remove the disc from the DVD drive and press the ‘SETUP’ button on the remote control, the settings menu will appear. It includes General Setup, Speaker Setup, Dolby Digital Setup, Video Setup and Preference setup.
System Setup 3. OSD Language There are five kinds of different OSD languages for selection. You can select it according to your preference. 4. SPDIF Output This item is used to set the format of digital audio. ‘SPDIF OFF’ turns off the digital audio;...
DVD discs contain up to 8 audio bit streams. For Example: English, French etc. To select the audio bit stream you prefer press the AUDIO button on the remote control during playback. The DVD player will play the next audio bit stream every time you press the AUDIO button in succession.
System Setup Region Code The video industry encodes DVDs to contain Regional Codes which can be used to prevent the playback of certain discs depending upon the geographical area it is manufactured, purchased and played in. The PDV 0700 is set for Region 1. For use when traveling outside of Region 1 and playing DVDs purchased outside of Region 1 follow the steps listed below: Remove DVD from player.
(point A) you wish to play repeatedly. Press the A-B button again at the end of the segment (point B). The DVD player will automatically return to point A and repeat playback of the selected segment. (A-B). To resume normal playback press the A-B button again.
Playback Functions Search by time You can use the GOTO button to search by time, namely to play from a specific time. During DVD playback, press the GOTO button once and TV screen will display the title or chapter, then you can use number buttons to select any one of them. Press the GOTO button twice, then you can use number buttons to input the time you desired (hour, minute, second), and the player will play from the inputted time.
Playback Functions Playing a JPEG JPEG is a common picture format that has few bytes and low loss rate of picture. Hundreds of pictures can be stored in a disc in this format. In order to realize real digital album, use film to make ”PICTURE CD”, namely JPEG format. OPERATION 1.
Care of Discs How to hold discs When loading or removing discs, try not to touch their playing surfaces. Cleaning Fingerprints or other dirt on the disc may affect sound and picture quality. To clean your discs, use a soft clean cloth to wipe them.
About the Rechargeable Battery Your portable DVD player comes with a lithium ion rechargeable battery that attaches to the bottom of the player. 1. Under normal working conditions, the battery can be charged and discharged over 300 times. 2. The properties of the rechargeable battery are: 7.4 Volts, with a capacity of 4200mAh, interior lithium ionic electric circuit protection for recharge and discharge.
WARNING: the battery in standby mode. To get out of standby mode please connect the battery and portable DVD player to AC or DC power. Others possibilities: Static or other external interference may cause the player to function abnormally. In this circumstance unplug the power-supply cord from the outlet and plug it in again to reset the player so that normal operation can resume.
Specifications TFT screen size Laser Wavelength Video System Frequency Response Audio Signal-to-noise Rate Audio distortion + noise Channel Separation Dynamic Range Analog Audio Out Audio Out Digital Audio Out Video Out Video Out Power AC100-240V~50/60Hz Power Consumption <25W Dimension w/o battery 7.7”...