Charging The Receiver's Rechargeable Battery - Sennheiser Flex 5000 Manual

Flex_5000_570735_0117_PRT.book Seite 11 Montag, 10. Oktober 2016 3:58 15

Charging the receiver's rechargeable battery

A complete charging cycle takes
the receiver for the first time, charge its rechargeable battery
for a complete charging cycle without interruption.
When the rechargeable battery is almost empty, the
status
LED lights up red and you hear 2 beeps via the receiver.
Battery
The LED
receiver switches off after a few minutes.
Place the receiver into the transmitter's charging compart-
ment so that the volume buttons face upwards. The
receiver is magnetically oriented to the correct position.
The receiver automatically switches off and the
LED on the transmitter lights up white. The LED seg-
ments display the charge status of the rechargeable bat-
tery. When the rechargeable battery is fully charged, all
LED segments light up white.
Battery
LED
–
st
1 segment flashes
st
1 segment lit,
nd
2 segment flashes
st nd
1 + 2 segments lit,
rd
3 segment flashes
All segments lit
Putting the Flex 5000 into operation EN
about 3
on the transmitter lights up white. The
Meaning
Transmitter is not charging.
Rechargeable battery is being
charged. Less than 1/3 of the
charge capacity is reached.
Rechargeable battery is being
charged. Up to 1/3 of the charge
capacity is reached.
Rechargeable battery is being
charged. Up to 2/3 of the charge
capacity is reached.
Rechargeable battery is fully charged.
hours. Before using
Receiver
Battery
3 h
100
%
Flex 5000 | 11