Installing the slim ODD
1
Slide the slim ODD into the slot on the chassis.
2
Tighten the screw to secure the slim ODD to the chassis.
3
Install the
side
cover.
4
Follow the procedure in
Front input and output bezel
Removing front input and output bezel
1
Follow the procedure in
2
Remove the:
a
side cover
b
front bezel
3
To remove the front input and output(I/O) bezel:
a
Pry the four retention tabs[1] from the chassis and push the bezel out from the chassis[2].
22
Removing and installing components
After working inside your
computer.
Before working inside your
computer.