GE 2-9896 Use & Care Manual page 6

INSTALLATION - DESK OR TABLE TOP
Follow these steps to connect your new :
A.
Introduction
Answer-Phone for proper operation. Make sure
you have a modular telephone jack and a
standard AC electrical outlet near the place
you have chosen to install your Answer-Phone.
1. Connect the Coiled Cord
Plug one end of the coiled cord into the
handset and plug the other end into the
handset jack. Place the handset in the
cradle.
2. Connect the Long Telephone Line Cord
Plug one end of the line cord into the
PHONE LINE jack on the unit. Plug the
other end into the telephone outlet. An
RJ11C outlet jack is required. If you don't
have an RJ11C, an adapter can be
purchased from any telephone store.
10
B.
Installation for Desk or Table
Top Use
0
INSTALLATION DESK OR TABLE
3.
Lift cassette compartment door and insert
micro cassette tape A side up.
4. Connect the Power Cord
Plug the right angle plug on the power cord
into the Answer-Phone power jack.
5. Plug in the Power Supply
Plug the POWER
SUPPLY CORD
into a 120V
AC outlet.
Lift the HANDSET to check for dial tone.
Your installation is completed.
Note:
During power outages the Answering
system will not function. The telephone,
however, will remain operational.
11