GE 2-9896 Use & Care Manual page 4

CONTROLS and FEATURES
----
6
D
D
CONTROLS and FEATURES
1. Hook Switch - Connects and disconnects the telephone.
2. Handset Hook - Holds the handset in place when mounted
on the wall.
3. Handset - Contains transmitter and receiver for phone
conversation.
4. Flash Button - Creates a signal for special services such as
call waiting.
5. Memory Store/In Button - Stores phone numbers in phone
memory.
6. Base Jack - Jack for coil cord.
7. Handset Jack- Jack for coil cord.
8. ( •) and (#) - Used in touch tone mode for special service
functions.
9. Memory Dial Button - Dials stored phone numbers.
10. Redial Button - Redials last number dialed and acts as
pause function in memory storage of phone numbers.
11 . Emergency Quick Dial Buttons - Provide instant dialing of
up to 3 important telephone numbers by pressing A, 8 or C.
12. Directory Card - Listing space for names/numbers in phone
memory.
13. Telephone Key Pad - Dials, enters phone numbers into phone
memory, and selects 1-9 stored numbers.
14. Phone Line Jack- Connects the supplied modular cord.
15. Base Plate - Use to adapt the phone to either table top or
wall mount installation.
16. Pulse/Tone Switch- Sets the dialing mode to match your
phone system.
17. Ringer Volume - Sets ringer volume Hi, Lo, or Off.
C.
Telephone
Controls
7