Invacare Ultra Low Maxx User Manual page 41

Fig. 4-21
1. Loosen the two nuts A.
2. Adjust hip pad to desired depth.
3. Tighten nuts.
Adjusting Hip Pad Height
You can adjust the hip pad height in two ways:
• Via its mounting slots.
• Via its bracket.
Via mounting slots
• 10 mm wrench
60101832-A
1.
Fig. 4-22
2.
3. Insert hip pad bracket in other mounting slot.
4. Tighten nuts.
Via bracket
Fig. 4-23
Loosen the two nuts A.
Fig. 4-24
Remove hip pad bracket from mounting slot via cut-out
B.
• 5 mm Allen key
Setup
41