Replacing the fingerprint-reader
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the fingerprint reader daughter-board on the palm-rest assembly.
2
Align the fingerprint reader daughter-board bracket on the palm-rest assembly.
3
Replace the two screws (M2x2) that secure the fingerprint reader daughter-
board to the palm-rest assembly.
Post-requisites
1
Replace the
computer
2
Replace the
rear
3
Replace the battery.
4
Replace the
base
82
computer. After working inside your computer, follow
After working inside your
base.
cover.
cover.
computer. For more safety best
www.dell.com/
Before