Replacing the fans
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align and place the fans on the heat sink.
2
Replace the four screws (M2x3) that secure the fan to the system board.
3
Adhere the tape that secures the fans to the heat sink.
4
Connect the left-fan cable and the right-fan cable to the system board.
5
Turn the computer base over.
6
Replace the five screws (M2x1.4) that secure the fans to the heat sink.
Post-requisites
1
Replace the
computer
2
Replace the
wireless
3
Replace the
solid-state
4
Replace the
memory
5
Replace the
rear
6
Replace the
coin-cell
7
Replace the battery.
8
Replace the
base
76
computer. After working inside your computer, follow
After working inside your
base.
card.
drive.
modules.
cover.
battery.
cover.
computer. For more safety best
www.dell.com/
Before