Replacing The Power-Button Board; Procedure; Post-Requisites - Dell Inspiron 15 7000 Gaming Service Manual

Replacing the power-button
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Align the screw holes on the power-button board with the screw holes on the
palm-rest assembly.
2 Replace the two screws (M2x3) that secure the power-button board to the
palm-rest assembly.
3 Adhere the power-button board cable to the palm-rest assembly.
4 Slide the fingerprint-reader board cable into the connector on the fingerprint-
reader board and close the latch to secure the cable.

Post-requisites

1 Replace the computer
2 Replace the rear
3 Replace the battery.
4 Replace the base
computer. After working inside your computer, follow
After working inside your
base.
cover.
cover.
computer. For more safety best
www.dell.com/
Before
79