Replacing The Logo - Electro-Voice EVID-S Installation Manual

3.
4.4

Replacing the logo

An additional logo is included, horizontal installation is shown.
To replace the logo, do the following:
1.
2.
3.
4.
5.
Electro-Voice
Attach the flush input cover (B).
B
Remove the existing logo.
Clean the surface with alcohol.
Align the logo with the logo recess on the grille.
Remove the paper backing.
Insert the logo.
Press firmly to ensure the logo is applied.
Installation manual
en 19
2017.08 | 01 | F.01U.345.360