Evid-S8.2T Speaker 8" Cabinet 70/100V - Electro-Voice EVID-S Installation Manual

EVID-S Surface Mount Loudspeakers
2.
3.
4.3.3

EVID-S8.2T speaker 8" cabinet 70/100V

Configuring the transformer settings
To configure the transformer settings, do the following:
1.
2.
2017.08 | 01 | F.01U.345.360
If 8 ohm mode is desired, remove the safety screw.
Safety screw (A) is shown in the previous step.
Attach the flush input cover (B).
Select the desired power tap by using the rotary switch on the input panel.
+
A
If 8 ohm mode is desired, remove the safety screw.
Safety screw (A) is shown in the previous step.
B
Installation manual Electro-Voice