Samsung RHF025EE Series Installation Manual page 12

Electric Wiring (Continued)
Screw
Electrical component box
Maintenence cover
Electrical component box
Cable fixation
12
E-
Electric Wiring
1 Remove the 4 screws on the electrical component box and open the cover plate.
2
Connect the cables correctly as seen in the picture.
 Fix the cables with a cable tie.
3 Connect the cable to the terminal board with a compressed ring terminal.
 Fix the screws in the electrical component box with designated torque
Screw
referring to the table.
Recommended size
CAUTION
 Do not wash the heat exchange element. It may decrease the efficiency.
 Make sure to use rated cable for power supply and do not extend or cut
the cord.
 The unit should be installed in accordance with the National Electrical
regulations. Ensure that the national safety code requirements have been
followed for the main supply circuit.
Connect to ERV wired remote control
Connect to power supply wire
Compressed ring terminal
Cable
Size M5 Bolt
N·m 1.34~2.0
kgf·cm 13.4~20.0
Fixing part of electrical wires
M6 Bolt
1.67~2.5
16.7~25.0