Page 2
Registration and Configuration Register with LiveSecurity® Service • Find the serial number on your device and record it. • G o to http://www.watchguard.com/activate • L og in. NOTE: If you are new to WatchGuard®, follow the instructions provided at the URL above to create a profile. • F ollow the instructions on the screen to enter your serial number and receive a feature key. NOTE: If you will not have an Internet connection during the setup procedure, we recommend that you copy your feature key to a text file during the activation process.
Page 3
• C onnect the power cord to the power socket on the back panel of the device. • T o access the Web UI Setup Wizard, connect to the WatchGuard XCS using one of these methods: Connect your computer to the same network as the WatchGuard XCS through a network switch. Connect the WatchGuard XCS to the network switch using the first onboard Ethernet connector (NIC 1) at the left side of the back panel. Connect your computer directly to the WatchGuard XCS using a cross-over Ethernet cable connected to the first onboard Ethernet connector (NIC 1) at the ...
Page 4
Interfaces. • A weekly full email report is scheduled to be emailed to the administrator each Saturday. To configure additional reports, select Activity > Reports > Schedule. Software Updates • T he Security Connection feature contacts WatchGuard’s support servers daily to check for new software updates. • T o install new software updates for your device, select Administration > Software Updates > Updates. 4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...