Table of Contents
Advertisement
Lubrication Guide
Check and lubricate all components at the intervals outlined in the Peri-
odic Maintenance Chart beginning on page 47. Items not listed in the
chart should be lubricated at the General Lubrication interval.
The a-arms and lower control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
Item
Engine Oil
Brake Fluid
Drive Chain(s)
Transmission Oil
Demand Drive Fluid
(Front Gearcase)
Front Prop Shaft
Yoke
Lube
PS-4 PLUS Performance
Synthetic 2W-50
DOT 4 Only
O-ring chain lube or SAE
80/90
AGL Synthetic Gearcase
Lube
Demand Drive LT
Premium Fluid
Premium U-Joint Lube
MAINTENANCE
Method
See page 52.
See page 59.
Lubricate.
See page 56.
See page 58.
Grease fittings (3 pumps maximum)
every 500 miles (800 km), before long
periods of storage, or after pressure
washing or submerging.
Front Prop Shaft Yoke
51
Advertisement
Table of Contents
