Installation Of The Fuel Injectors - Yanmar 3TNV82A-B Service Manual

FUEL SYSTEM

Installation of the Fuel Injectors

2-Valve Cylinder Head
1. Reinsert a new nozzle seat (Figure 7-59, (4))
and nozzle protector (Figure 7-59, (3)) in the
cylinder head for each injector.
2. Reinstall a O-ring on to each injector body.
3. Reinsert each fuel injector into the cylinder
head.
4. Reinstall the fuel injector retainers
(Figure 7-59, (2)) and torque the retaining bolts
to specification.
5. Reinstall the fuel return hoses
(Figure 7-59, (1)), one on each side of each
injector.
6. Reinstall the fuel high-pressure fuel line
assembly and tighten the nuts using a "line" or
"flare nut" wrench.
(1)
(2)
Figure 7-59
7. Prime the fuel system. See Priming the Fuel
System on page 4-15.
8. Operate the engine and check for fuel and
coolant leaks.
7-42
(3)
(4)
0002092A
4-Valve Cylinder Head
1. Reinsert a new nozzle seat (Figure 7-60, (6))
and nozzle protector (Figure 7-60, (5)) in the
cylinder head for each injector.
2. Reinstall a O-ring on to each injector body.
3. Reinsert each fuel injector (Figure 7-60, (4))
into the cylinder head.
4. Reinstall the fuel injector retainers
(Figure 7-60, (3)) and torque the retaining bolts
(Figure 7-60, (2)) to specification.
5. Reinstall the fuel injector return line assembly
using new gaskets on each side of the injector
line screws.
6. Reinstall the fuel high-pressure fuel lines to
each injector and tighten the nuts using a "line"
or "flare nut" wrench.
(4)
(5)
(6)
Figure 7-60
7. Prime the fuel system. See Priming the Fuel
System on page 4-15.
8. Operate the engine and check for fuel and
coolant leaks.
TNV DI Service Manual
Fuel Injectors
(2)
(1)
(3)