Yanmar 3TNV82A-B Service Manual page 127

Industrial
Hide thumbs Also See for 3TNV82A-B:
Table of Contents

Advertisement

Periodic Maintenance Procedures
A
WARNING
BURN HAZARD!
• Wait until the engine cools before you
drain the engine coolant. Hot engine
coolant may splash and burn you.
• Failure to comply could result in death
or serious injury.
A
CAUTION
COOLANT HAZARD!
• Wear eye protection and rubber gloves
when you handle long life or extended
life engine coolant. If contact with the
eyes or skin should occur, flush eyes
and wash immediately with clean
water.
• Failure to comply may result in minor
or moderate injury.
TNV DI Service Manual
• ALWAYS be environmentally
responsible.
• Follow the guidelines of the EPA or
other governmental agencies for the
proper disposal of hazardous
materials such as engine oil, diesel
fuel and engine coolant. Consult the
0000016en
local authorities or reclamation facility.
• NEVER dispose of hazardous
materials irresponsibly by dumping
them into a sewer, on the ground, or
into ground water or waterways.
• Failure to follow these procedures may
seriously harm the environment.
Engine coolant contaminated with rust or scale
reduces the cooling effect. Even when extended life
engine coolant is properly mixed, the engine
coolant gets contaminated as its ingredients
deteriorate. Drain, flush and refill the cooling
system with new coolant every 1000 hours or once
a year, whichever comes first.
1. Allow engine and coolant to cool.
0000005en
2. Remove the radiator cap (Figure 5-16, (1)).
3. Remove the drain plug or open the drain cock
(Figure 5-16, (2)) at the lower portion of the
radiator and drain the engine coolant.
PERIODIC MAINTENANCE
CAUTION
0000013en
5-37

Advertisement

Table of Contents
loading

Table of Contents