Reassembly Of Camshaft And Timing Components - Yanmar 3TNV82A-B Service Manual

Crankshaft and Camshaft Components
4. Reinstall the bearing inserts (Figure 6-143, (1))
in the connecting rod and cap.
5. Apply a liberal coat of clean engine oil to the
bearing inserts and crankshaft journal.
6. Apply a light coat of clean engine oil to the rod
cap bolts. Reinstall the connecting rod cap
(Figure 6-143, (2)). Tighten the connecting rod
bolts to the specified torque in two stages (1/2
then full torque). See Special Torque Chart on
page 6-25 for specifications.
Figure 6-143
7. Reinstall the remaining pistons in their
respective cylinders.
TNV DI Service Manual
Reassembly of Camshaft and Timing
Components
Installation of Gear Case or Front Plate
1. If removed, install a new camshaft bushing
2. Apply a continuous bead of ThreeBond Liquid
3. 4TNV94 - 4TNV106: Install two new O-rings
(1)
(2)
0001965
(Figure 6-144, (3)) using the appropriate
service tool.
Gasket No. 1212, Yanmar Part No. 977770-
01212 to the mounting area of the gear case or
front plate. Be sure to circle each bolt hole.
(Figure 6-144, (2)) in the cylinder block.
(2)
Figure 6-144
ENGINE
(1)
(3)
(4)
0001737B
6-95